Precision Regulator G1/2
- Series PR
- Precise pressure control
- Characteristics such as flow characteristic, pressure characteristic and repeatability are superior compared with standard regulators
- Excellent relief flow characteristic is available
- Suitable for Panel & Modular mountings
- Diaphragm operated, relieving type (Exhaust)
- Clamp and pressure gauge can be mounted either in the front or the back
- Can be assembled with F15, FRC15, FS15 & L15 series of products.
- Manufacturers of air gauging equipment,
- Medical equipments,
- Leak testing equipment,
- Polishing machinery,
- Web tensioning,
- Measuring machines,
- Ink or paint, Robotics spraying systems,
- Tank blanketing and many…
- If the supply pressure line contains drainage or dirt, etc., the disc can become clogged leading to malfunction, and therefore, in addition to an air filter be sure to use a mist separator.
- Never use a lubricator on the supply side of the regulator, as this will positively cause the disc to become clogged and lead to malfunction. If lubrication is required for terminal devices, connect a lubricator on the output side of the regulator.
- Do not use a precision regulator outside the range of its specifications as this can cause failure. (Refer to technical specifications)
- When mounting is performed, make connections while confirming port indications.
- Air is normally released from the bleed hole (the hole on the side of the body’s mid-section). This is necessary consumption of air based on the construction of the precision regulator, and is not an abnormality.
- Make sure to tighten the lock nut after pressure adjustment.
